Kodak ESP 3 All-in-One Printer — User Guide
Table of Contents > Product Overview > Memory Cards
1 Product Overview
Memory Cards
Memory card slots
You can insert a memory card directly into one of the memory card slots on the Kodak ESP 3 All-in-One printer. The printer supports connection of only one memory card device at a time.
The green LED memory card light located to the left of the memory card slots flashes while the card is being accessed.
IMPORTANT: | Do NOT remove the memory card while the light blinks, or you may damage the card. |
Memory cards supported
The Kodak ESP 3 All-in-One printer supports the memory cards used in most digital cameras:
-
XD xD-Picture Card
-
MS Memory Stick, Memory Stick Pro and Magic Gate
-
SD Secure Digital Card, Multi-Media Card
-
CF Compact Flash type I and type II, including micro drives
-
SDHC Secure Digital High Capacity cards
The printer also supports the following memory cards with Memory Stick and SD/MMC card slot adapters you can purchase:
-
Memory Stick Duo and Memory Stick Duo Pro
-
miniSD
-
MicroSD (TransFlash)
Previous Next