KODAK ESP 3200 Series All-in-One Printer — Includes Information for the: ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer

Table of Contents > Configuring Your Printer > Connecting to another KODAK All-in-One Printer

---

2 Configuring Your Printer

Connecting to another KODAK All-in-One Printer

If you are connecting to a newer model printer (for example, you already have an ESP 7 printer and now you adding an ESP 3250 printer), you must install the software for the newer model.

If you are connecting to another ESP 3250 printer or to an older model:

• On a WINDOWS OS-based computer:

  1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.

  2. If your all-in-one printer is not listed:

     • Select No, my printer is not listed, then click Next.

     • From the drop-down list, select your printer.

     • Select USB Cable - connect your cable now.

     • Connect the USB cable to the computer and printer.

     • Click Next. When your printer is detected, driver installation begins

  3. If your all-in-one printer is listed:

     • Highlight the all-in-one printer that is connected to your network.

     • Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.

  4. When driver installation is complete, click Done.

• On a MACINTOSH Computer:

  1. From the dock, open System Preferences.

  2. Click Print & Fax.

  3. Click the + sign to add the printer.

  4. Select the printer from the list of available printers, then click Add.

Previous Next