KODAK ESP 3200 Series All-in-One Printer — Includes Information for the: ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer


Table of Contents > Configuring Your Printer > Configuring printer settings

2 Configuring Your Printer

Configuring printer settings

Configuring basic printer settings

NOTE: When you first power on the printer, the printer automatically steps you through the process of selecting the Language.

To set or change basic printer settings:

  1. Press Home.

  2. Press to select Printer Settings, then press OK.

  3. Press to select one of the following settings:

    • Date and Time*

      • Press OK, then press to select Year, Month, Day, Hour, or Minute. Press or to change the values; press OK when you are done.

    • Time to Low Power

      • Press to change the time to energy-saving low power (select from 1 to 4 hours in 0.5 hour increments). After the Time to Low Power, the printer goes into a low-power mode.

    • Tagged Images Printing (see Printing tagged pictures)

      • Press to select On or Off. If you select On, when you are printing pictures, the printer LCD prompts you to verify that you want to print pictures that were tagged (or marked) using your camera. Different cameras use different terminology; KODAK Digital Cameras use "marked" images; others use either tagged images or DPOF.

    • Language

      • Press OK, press to select a language, then press OK.

    • Reset All Settings (see Resetting factory defaults)

      NOTE: Resetting factory defaults does not change the date and time, language, or country/region.

  4. Press Back.


* You can also synchronize the printer's date and time to your computer from Home Center Settings under Tools in Home Center Software.

Setting your printer as the default printer

If you have more than one printer, and after installation your all-in-one printer was not the default printer, you can make your all-in-one printer your default printer.

For all computers and operating systems: If you haven't yet installed the printer software, insert the software CD that came with your printer and follow the on-screen instructions to install the software.

For WINDOWS XP OS-based computers

  1. Select Start > Control Panel > Printers and Faxes.

  2. Right-click your printer, and select Set as Default Printer.

For WINDOWS VISTA OS-based computers

  1. Select Start > Control Panel > Hardware and Sound > Printers.

  2. Right-click your printer, and select Set as Default Printer.

For WINDOWS 7 OS-based computers

  1. Select Start > Control Panel > Hardware and Sound > Devices and Printers.

  2. Right-click your printer, and select Set as Default Printer.

For MACINTOSH Computers

When a new printer is installed, it becomes the default printer. If your all-in-one printer is not the default printer:

  1. From the dock, open System Preferences.

  2. In the Hardware section, click Print & Fax.

  3. Select your printer from the drop-down list next to Default Printer.



Previous Next