KODAK ESP 3200 Series All-in-One Printer — Includes Information for the: ESP 3250 All-in-One Printer ESP 3260 All-in-One Printer


Table of Contents > Printing Pictures > Changing Print Photos Options / Defaults

4 Printing Pictures

Changing Print Photos Options / Defaults

You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.

To change print photos options:

  1. Press Home.

  2. If necessary, press to select View and Print Photos, then press OK.

  3. Press or as needed to change the settings below.

    Print Photos Option Settings Description

    View Photos

    --

    Scroll through the pictures on the memory card.

    Transfer All to PC

    --

    To transfer all the pictures on the memory card to your computer, press OK then Start. (Your printer and computer must be connected with a USB cable.)

    Quantity

    1 (default) to 99

    The number of copies that print.

    Print Size

    2 x 3

    3.5 x 5

    4 x 6 (default)

    4 x 7

    5 x 7

    4 x 12

    8 x 10

    8.5 x 11 or A4

    If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.

    Plain Paper Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality.

    Draft

    The fastest print speed.

    Photo Paper Quality

    Automatic (default)

    The printer detects when you load photo paper and sets Best quality automatically.

    Color

    Color (default)

    Prints full color.

    Black & White

    Prints black and white (gray scale).

    Scene Balance

    On (default) Off

    Adjusts the image brightness to correct for underexposure and reduces the variation in contrast in different areas of the picture.

    Add Date to Prints

    No (default) Yes

    Prints the date of the picture(s) (the date the picture was taken or last edited) in a corner of the print.

    Save as Defaults

    No (default) Yes

    To save settings as the new default, press OK, select Yes, then press OK.



Previous Next