KODAK ESP 9200 Series All-in-One Printer — Extended User Guide
Table of Contents > Printing > Printing documents
4 Printing
Printing documents
To print a document from your computer:
-
Open the document.
-
Select File > Print.
-
In the Print dialog box, select your KODAK Printer.
-
Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).
Printing two-sided documents
Print two-sided documents either automatically with the built-in duplexer or by manually rotating and reloading the paper.
Automatic two-sided printing
The duplexer can print two-sided documents automatically on:
-
plain paper
-
standard paper sizes
-
letter (8.5 x 11 in. / 22 x 28 cm)
-
A4 (8.3 x 11.7 in. / 21 x 30 cm)
-
executive (7.3 x 10.5 in. / 18 x 27 cm)
-
B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: The paper width must be 3.9 to 8.5 in. / 10 to 22 cm. The paper length must be 7 to 11.7 in. / 18 to 30 cm.
-
The duplexer cannot print:
-
borderless prints
-
poster layout
Automatic two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS using the duplexer:
-
Load plain paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that KODAK ESP 9200 Series AiO is selected, then click Properties.
-
Select the Layout tab.
-
Select Automatically with Duplexer.
-
Under Flip on, select Long edge or Short edge, then click OK.
-
Click OK.
Automatic two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS using the duplexer:
-
Load plain paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that Eastman Kodak Company ESP 9200 Series AiO is selected.
-
In the Copies & Pages drop-down list, select Layout.
-
In the Two-Sided drop-down list, select either Long-Edge binding or Short-Edge binding.
-
Click Print.
Manual two-sided printing
You can print two-sided documents on any size paper that the printer accepts (see Paper sizes) when you rotate the paper manually.
IMPORTANT: | Manual two-sided printing will not work on bar-coded photo paper (the bar code is on the back side). Manual two-sided printing can only be done on media that can absorb ink on both sides, such as plain paper or two-sided photo paper. |
Manual two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS:
-
Load paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that KODAK ESP 9200 Series AiO is selected, then click Properties.
-
Select the Layout tab.
-
Select Manual (Instructions provided), then click OK.
-
Click OK.
-
When a message appears on your computer and printer LCD, remove the printed pages from the output tray.
-
Rotate the printed pages 180 degrees, and place them into the paper tray (printed side up).
-
Press Start Black or Start Color on the printer.
NOTE: It does not matter which Start button you press; the print job will continue printing in either color or black, depending on the document.
Manual two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS:
-
Load paper into the paper tray.
-
Open the document you want to print, then select File > Print.
-
In the Print dialog box, make sure that Eastman Kodak Company ESP 9200 Series AiO is selected.
-
In the Copies & Pages drop-down list, select Paper Handling.
-
In the Pages to Print drop-down list, select Odd Only.
-
In the Page Order drop-down list, select Reverse.
-
Click Print.
-
When the odd pages have finished printing, remove the printed pages from the output tray.
-
Rotate the printed pages 180 degrees and place them into the paper tray (printed side up).
-
Select File > Print.
-
In the Copies & Pages drop-down list, select Paper Handling.
-
In the Pages to Print drop-down list, select Even Only.
-
In the Page Order drop-down list, select Normal.
Printing forms
You can print the following preprogrammed forms:
-
Sheet music (landscape)
To print a preprogrammed form:
-
Press Home.
-
Press to select Printable Forms, then press OK.
-
Press to select a form.
-
Press or to select a quantity (up to 99), then press OK.
-
Press Start Black or Start Color on the printer.
NOTE: It does not matter which Start button you press; the form will printing in either color or black, depending on the form.
Previous Next