KODAK ESP 9200 Series All-in-One Printer — Extended User Guide


Table of Contents > Printing > Printing pictures

4 Printing

Printing pictures

You can print pictures with your all-in-one printer from:

  • A memory card inserted into a memory card slot

  • A storage device (such as a flash drive) or camera connected to the front USB port with a USB cable

  • A BLUETOOTH Technology enabled device (with the optional KODAK Wireless 2.0 USB BLUETOOTH Adapter plugged into the front USB port)

  • An iPhone / iPod Touch or BLACKBERRY Device (may not be available with all models). For information, go to www.kodak.com/go/picflick.

You can also print pictures using Home Center Software from your computer with WINDOWS OS. Home Center Software lets you edit and enhance your pictures quickly. Open Home Center Software, select Print Pictures, then follow the on-screen instructions.

On a computer with either MAC OS or WINDOWS OS, you can print pictures from KODAK EASYSHARE Software or any picture-editing or photo-management software.

Printing from a memory card or USB-connected device

You can print pictures from the following cards or USB-connected devices:

MS/XD/SD Card slot CF Card slot Front USB port

  • MULTIMEDIA Card (MMC)

  • XD Picture Card

  • SECURE DIGITAL (SD) Card

  • SECURE DIGITAL High Capacity (SDHC) Card

  • Variations of the memory cards above that require an adapter (for example, MEMORY STICK Duo, miniSD, microSD, and T-Flash)

  • COMPACTFLASH Card (Types I and II)

  • MICRODRIVE

  • PICTBRIDGE Technology enabled camera

  • Flash drive

  • KODAK Wireless 2.0 USB BLUETOOTH® Adapter

IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.

Using default settings to print a picture

To print a picture from a memory card or USB-connected device using the default settings:

  1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port.

    IMPORTANT: Use only one slot or port at a time.



  2. Press or to select the picture you want to print.

  3. Press Start Black to print a black-and-white picture, or Start Color to print a color picture.

    The printer prints a single 4 x 6 in. / 10 x 15 cm picture.

    IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing.

Changing the settings and printing a picture

You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.

To print a picture or pictures using settings other than the default settings:

  1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port.

    IMPORTANT: Use only one slot or port at a time.



  2. Press or to select the picture you want to print, then press OK.

  3. Repeat step 2 for each picture you want to print.

  4. Press Home.

  5. Press to select View and Print Photos, then press OK.

  6. Press to select an option, then press or to change the setting.

    Print Photos Option Settings Description

    View Photos

    --

    Scroll through the pictures on the memory card.

    Transfer All to PC

    --

    To transfer all the pictures on the memory card to your computer, press OK then press Start Black or Start Color. (It does not matter which Start button you press, but your printer and computer must be connected with a USB cable.)

    Rotate This Photo

    Press OK to rotate the selected photo.

    Quantity

    1 (default) to 99

    The number of copies that print.

    Tray Selection

    Top Tray (default)

    Picture prints on the paper in the top tray.

    Bottom Tray

    Picture prints on the paper in the bottom tray.

    Print Size

    2 x 3

    3.5 x 5

    4 x 6 (default)

    4 x 7

    5 x 7

    If bottom tray is selected, the following choices also appear:

    4 x 12

    8 x 10

    8.5 x 11 or A4

    If the selected print size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.

    Plain Paper Quality (only available if bottom tray is selected)

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal.

    Draft

    The fastest print speed, but the lowest quality.

    Photo Paper Quality

    Automatic (default)

    The printer detects when you load photo paper and sets Best quality automatically.

    Scene Balance

    On (default) Off

    Adjusts the image brightness to correct for underexposure and reduces the variation in contrast in different areas of the picture.

    Color

    Color (default)

    Prints full color.

    Black & White

    Prints black and white (gray scale).

    Add Date to Prints

    No (default) Yes

    Prints the date of the picture(s) (the date the picture was taken or last edited) in a corner of the print.

    Save as Defaults

    No / Yes

    To save the settings as the new default, press OK. With Yes selected, press OK.

  7. When you have finished changing settings, press Start Black to print a black-and-white picture, or Start Color to print a color picture.

    IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.

Printing tagged pictures

Some digital cameras let you tag (or "mark") pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will print according to the default settings on your printer (unless otherwise specified by the tag from the camera).

NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also "marked" or "DPOF") functionality.

To print tagged pictures:

  1. Insert the memory card into the appropriate card slot.



  2. When the "Print tagged images?" message appears, press Start Black to print a black-and-white picture, or Start Color to print a color picture.


Printing panoramic pictures

To print a panoramic picture, load 4 x 12 in. / 10 x 31 cm paper, or US letter or A4 paper in the main paper tray.

  1. Insert the memory card into the appropriate slot, or connect the digital camera or portable drive to the front USB port.

    IMPORTANT: Use only one slot or port at a time.



  2. Press or to select the picture you want to print, then press OK.

  3. Press Home.

  4. Press to select View and Print Photos, then press OK.

  5. Press to select Tray Selection, then press to select Bottom Tray.

  6. Press to select Print Size, then press to select 4 x 12.

  7. Press Start Black to print a black-and-white picture, or Start Color to print a color picture.

    IMPORTANT: To prevent loss of data from your memory card, camera, or portable drive, do not remove it from the printer while printing.

Printing pictures from a BLUETOOTH Technology enabled device

You can print pictures from wireless devices, such as mobile phones, digital cameras, and Personal Digital Assistants (PDAs) using the optional KODAK Wireless 2.0 USB BLUETOOTH Adapter.

NOTE: You can only print JPEG pictures.

To print a JPEG picture from a BLUETOOTH Technology enabled device:

  1. Insert the KODAK Wireless 2.0 USB BLUETOOTH Adapter into the front USB port.

  2. "Pair" the printer and the device so they can communicate.

    NOTE: You must "pair" from your device's interface. If your device prompts you for the printer's personal identification number (PIN), enter 1111.

  3. Select the picture you want to print, then select Send to begin printing.

    The printer prints one 4 x 6 in. / 10 x 15 cm picture.

    NOTE: For additional instructions, see the user manual for your device.



Previous Next