KODAK EASYSHARE Camera / M532 — User guide
Table of Contents > Product Overview
Front View
|
See the Extended user guide |
|
|
See How-To videos |
Back View
|
See the Extended user guide |
|
|
See How-To videos |
Attach strap, load and charge battery
|
See the Extended user guide |
Charging the battery
|
See the Extended user guide |
|
|
See How-To videos |
Use an SD/SDHC Card
Your camera has internal memory. We recommend purchasing an SD or SDHC Card to store more pictures/videos.
|
CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card while the camera is on may damage the pictures, the card, or the camera. |
| IMPORTANT: | When you turn on the camera, it checks to see if a card is inserted. If so, new pictures/videos are stored on the card. If no card is inserted, new pictures/videos are stored in the camera's internal memory. If pictures/videos are detected in internal memory and a card is inserted, the camera prompts you to move the pictures to the card (and erase those in internal memory). |
|
See the Extended user guide |
|
|
Purchase cards |
Turn on the camera
Set the language, date/time, sharing
|
See the Extended user guide |
|
|
See How-To videos |
Take a picture or video
|
See all picture modes |
|
|
See the Extended user guide |
|
See the Extended user guide |
|
|
See How-To videos |
Your camera, the way you want it
Use Tools to choose actions, preferences
Review pictures/videos
|
See the Extended user guide |
|
|
See How-To videos |
|
See the Extended user guide |
|
|
See How-To videos |
It's never been easier to share
| IMPORTANT: | To use the sharing and social networking features, you must install KODAK Software. (Install software, transfer pictures) |
-
Press the Share button to share anytime:
-
Press
and OK to choose social networking sites or email addresses. 
-
Press
When you transfer these pictures/videos to your computer, they are sent to the sharing destinations you chose.
to choose Done, then press OK.
|
See the Extended user guide |
|
|
See How-To videos |
Install software, transfer pictures
Install KODAK Software and get ready to share!
| IMPORTANT: | To use the sharing and social networking features, you must install KODAK Software. |
Make sure the computer is connected to the Internet. When you connect the camera to the computer, the KODAK Camera Setup App automatically runs. Follow the prompts to install the KODAK Share Button App.
|
|
|
|
|
1.
Turn off the camera.
|
||
|
2.
Use a KODAK Camera USB Cable, Micro B / 5-Pin to connect camera to computer.
|
|||
|
3.
Turn on the camera.
|
|||
|
4.
After the software is installed, follow the prompts to transfer pictures and videos to your computer.
|
|||
| NOTE: | If the installer does not run, find and launch it here:
|
|
See the Extended user guide |
|
|
See How-To videos |
Keep learning about your camera
|
See the Extended user guide |
|
|
See How-To videos |
Previous Next