KODAK OFFICE HERO 6.1 All-in-One Printer — Extended User Guide
Table of Contents > Copying > Two-sided copying
7 Copying
Two-sided copying
Automatic two-sided copying
With the built-in duplexer and the automatic document feeder (ADF), you can make two-sided copies of your documents automatically. You have the following options for two-sided copying:
-
one-sided original to two-sided copy
-
two-sided original to two-sided copy
-
two-sided original to one-sided copy
IMPORTANT: | Both the original and the copy must be on either letter or A4-sized plain paper. |
To copy a document:
-
Load plain paper into the paper tray, if necessary.
-
Place your original document (up to 35 pages) in the ADF (see Using the Automatic Document Feeder (ADF)).
-
Press Copy.
The Copy Document Options menu appears on the LCD.
-
Press to select Original, then press to select 1-sided or 2-sided, depending on your original(s).
-
Press to select Output, then press to select 1-sided or 2-sided.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
Manual two-sided copying
If the original is not on letter or A4-sized plain paper, or if you want the copy to be on paper other than letter or A4-sized plain paper, you can make two-sided copies manually.
To make a two-sided copy:
-
Load the paper into the paper tray.
-
Place your original on the scanner glass (see Using the scanner glass).
-
Press Copy.
The Copy Document Options menu appears on the LCD.
-
If necessary, press to make changes to copy size, quality, or brightness.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy.
-
Remove the printed page from the output tray and rotate it 180 degrees, then place the page into the paper tray (printed side up).
-
Place the next original on the scanner glass.
-
If necessary, press to make changes to copy size, quality, or brightness.
-
Press Start Black to make a black-and-white copy, or press Start Color to make a color copy .
Previous Next