KODAK HERO 4.2 All-in-One Printer — Extended User Guide


Table of Contents > Copying > Two-sided copying

7 Copying

Two-sided copying

Manual two-sided copying

If the original is not on letter or A4-sized plain paper, or if you want the copy to be on paper other than letter or A4-sized plain paper, you can make two-sided copies manually.

  1. Load the paper into the paper tray.

  2. Place your original on the scanner glass (see Using the scanner glass).

  3. Press .

  4. Touch Copy Document.

  5. If necessary, touch Options to make changes to the copy settings.

  6. Press to begin copying.

  7. Remove the printed page from the output tray and rotate it 180 degrees, then place the page into the paper tray (printed side down).

  8. Place the next original on the scanner glass.

  9. If necessary, make changes to the copy settings.

  10. Press to begin copying.



Previous Next