KODAK EASYSHARE DX3900 Zoom Digital Camera — User's Guide


Table of Contents > Reviewing Your Pictures > Running a Slide Show

4 Reviewing Your Pictures

Running a Slide Show

Use the slide show feature to automatically display your pictures on the camera LCD screen at a selectable interval rate. You can also run a slide show on any video device that is equipped with a video input, such as a television, computer monitor, or digital projector. The slide show feature is not available when you have only one picture stored on the Picture Card.

NOTE: The Slide Show feature is ideal for sharing pictures at a social function or at business meetings.


If you are running the slide show on an external video device, plug the video cable in as follows:

  • Plug the appropriate end of the video cable (included with your camera) into the video-out port on the camera. Plug the other end into the video-in port on your external device (television, VCR, computer monitor, digital projector).

  • Refer to your television or other device user's guide for details on video-in setup.

  1. Turn the Mode dial to Review and press Menu.

  2. Highlight the Slide Show menu , then press Select.


  3. Press Select to display the Slide Show Interval screen.

  4. Use the buttons to select how long each picture is displayed on the LCD screen (5-99 seconds).

  5. Press Select to start the slide show.

  6. Press Select again to cancel the Slide Show.



Previous Next