KODAK DX3600 Zoom Digital Camera — User's Guide

  1. To turn on the camera, slide the power switch to the On ( | ) position.

The lens extends to the Wide Angle position and the viewfinder light blinks green while the camera performs a self-check. When the viewfinder light glows steady green (and the Mode dial is set to Still or Video ) the camera is ready to take pictures or videos.

A screen message informs you which storage location is being accessed: the camera's internal memory or a Picture Card. See Choosing Internal Memory or Picture Card for storage location information.

In Still or Video modes, the status bar is briefly displayed on the LCD.

  2. To redisplay the status bar, press the right arrow . Press again to turn it off.

See Checking Current Camera Status for an explanation of the status bar icons.

  3. To turn off the camera, slide the power switch to the Off ( ) position.

NOTE:

The camera safely completes any Save, Delete, or Copy operations that are in process when the power is turned off.