KODAK EASYSHARE CX4230 Zoom Digital Camera — User's Guide

Table of Contents > Reviewing Pictures—Review Mode > Running a Slide Show

---

3 Reviewing Pictures—Review Mode

Running a Slide Show

Use the Slide Show to display your pictures on the LCD in the order in which you took them. To run a slide show on a television or other external device, see Displaying Pictures on a Television.

Starting the Slide Show

1. Press the Review button, then press the Menu button.
2. Highlight Slide Show , then press the Select button.
		3. Highlight Begin Show, then press the Select button. The pictures are each displayed once in the order in which you took them. Then the camera returns to the Menu screen. See Turning On Loop, for continual display.
4. To cancel the Slide Show, press the Select button.

NOTE:

If you connect or disconnect the video cable while a slide show is running, the slide show stops.

Changing the Display Interval

The default setting displays each picture for 5 seconds. You can increase the display interval to up to 60 seconds.

		1. On the Slide Show menu, highlight Interval, then press the Select button.
		2. Press to select a display interval. To scroll through the seconds quickly, press and hold .
		3. Press the Select button.

The Interval setting remains until you change it.

Turning On Loop

When you turn on Loop, the slide show is continuously repeated.

		1. On the Slide Show menu, press to scroll down to Loop; highlight Loop, then press the Select button.
		2. Highlight On, then press the Select button. The loop slide show begins immediately. It repeats continuously until you cancel it by pressing the Select button or until battery power is exhausted. Loop reverts to Off when the loop slide show stops.

Previous Next