Kodak EasyShare CX6330 zoom digital camera — User's Guide

Ready light does not turn on and the camera does not work.

Camera is not turned on.

Turn on the camera (Turning On the Camera).

Batteries are exhausted.

Recharge the battery (Charging the Battery) or install new ones (Using the Batteries).

Mode dial was on when batteries were reloaded.

Turn Mode dial off, then back on.

Ready light glows steady green.

Camera is on; ready to take a picture or video.

Camera is operating normally.

Shutter button is pressed halfway down. Focus and exposure are set.

Camera is operating normally.

Ready light blinks green.

Picture is being processed and saved to the camera.

Camera is operating normally.

Ready light blinks yellow.

Flash is not charged.

Wait. Resume picture taking when the light stops blinking and turns green.

Auto exposure or auto focus are not locked.

Release the Shutter button and recompose the picture.

Ready light blinks red.

Batteries are low or exhausted.

Recharge the battery (Charging the Battery) or install new ones (Using the Batteries).

Ready light glows steady red.

Camera's internal memory or card is full.

Transfer pictures to the computer (Connecting Camera to Computer or Transferring Pictures With the Dock), delete pictures from the camera (Deleting Pictures and Videos), switch storage locations (Choosing Internal Memory or MMC/SD Card), or insert a card with available memory (Inserting an MMC/SD Card).

Camera processing memory is full.

Wait. Resume picture taking when the light turns green.

Card is read-only.

Change storage location to internal memory (Choosing Internal Memory or MMC/SD Card), or use a different card.