Kodak EasyShare CX6200 digital camera — User's Guide
Table of Contents > Getting Started > Setting the Date and Time
1 Getting Started
Setting the Date and Time
Setting the Date & Time, First Time
The Date & Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.
|
|
|
|
|
1.
SET DATE & TIME is highlighted. Press the OK button.
The Date & Time screen appears. The date format is YYYY/MM/DD. The time is displayed in a 24-hour format. Or, select CANCEL then press the OK button to set the date and time at a later time. Press  to adjust the date and time. Press  to advance to the next setting. When finished, press the OK button. |
||
|
2.
Press the Menu button to exit the menu.
The setting remains until you change it. |
|||
| NOTE: | Depending on your computer operating system, Kodak EasyShare software may allow your computer to automatically update the camera clock when you connect the camera. See the Kodak EasyShare software Help for details. |
Setting the Date & Time, Anytime
|
|
|
|
|
|
1.
Turn on the camera. Press the Menu button.
|
||
|
2.
Press
 to highlight Setup Menu  , then press the OK button. |
|||
|
3.
Highlight the Date & Time icon, then press the OK button.
|
|||
Previous Next