Kodak EasyShare CX6230 zoom digital camera — User's Guide

Table of Contents > Getting Started > Inserting an MMC/SD Card

---

1 Getting Started

Inserting an MMC/SD Card

Your camera has 16 MB of internal memory. However, optional SD/MMC cards provide removable, reusable storage for pictures and videos.

CAUTION: The card should only be inserted as explained below. If inserted incorrectly, the door won't close, and forcing it may damage the camera or card. Do not insert or remove a card when the green ready light is blinking; doing so may damage your pictures, card, or camera.

		To insert an SD/MMC card:
		1. Turn off the camera.
		2. Open the card door.
		3. Orient the card as shown.
		4. Push the card into the slot to seat the connector.
		5. Close the door.

To remove the card, push it in, then release it. When the card is partially ejected, pull it out.

See Picture Storage Capacity for storage capacities. Purchase SD/MMC cards at a dealer of Kodak products. See www.kodak.com/go/cx6230accessories.

Previous Next