Kodak EasyShare printer dock 4000 — User's Guide


Table of Contents > Getting Started with Your Camera > Selecting Pictures for Automatic Printing

2 Getting Started with Your Camera

Selecting Pictures for Automatic Printing

Follow the process below for your camera model, to tag and select the number of copies for automatic printing, before you place your camera in the printer dock. Camera settings vary depending on your camera model.

For camera models (DX4330, DX4530, CX4200, CX4210, CX4230, CX4300):

  1. Press the Review button, then locate a picture.

  2. Press the Share button. Highlight Print , then press the OK button.

  3. Press to select the number of copies (0-99). Zero removes the tag for that picture.

    The Print icon appears with the picture.

  4. Press the OK button. Press the Share button to exit the Share menu.

For camera models (DX3215, DX3700):

  1. Slide the Mode selector to Setup .

  2. Press the buttons to highlight the Review Options then the buttons to highlight Print Order. Press Select.

  3. Select All Pictures, then press Select.

  4. Press button to select the desired number of prints. Press Select.

For camera models (DX3500, DX3600, DX3900, DX4900):

  1. Turn the Mode dial to Review then press the Menu button.

  2. Press the buttons to display the picture you want to select for printing.

  3. Highlight the Print Order menu then press the Select button.

  4. Highlight the Print Order setting you want to use, then follow the on-screen directions to complete your order.

  5. Press Select.

  6. The Print Order icon appears on the LCD screen with the pictures that are marked for printing.

  7. Press Select.

  8. Press Menu to exit the Menu screen.



Previous Next