Kodak EasyShare printer dock — User's Guide

Table of Contents > Printing without a computer > Printing from a Kodak 8-in-1 card reader

---

3 Printing without a computer

Printing from a Kodak 8-in-1 card reader

Connect a Kodak 8-in-1 card reader to the printer dock to print pictures from your camera card.

NOTE:

Other Kodak USB card readers may work with the printer dock, however card readers made by manufacturers other than Kodak are not supported.

1. For best results, tag pictures on your camera card for printing (see Tagging pictures for automatic printing or your camera user's guide). If you do not tag pictures on your camera card, you will have the option of printing only the most recent picture on the card.
		2. Plug the USB connector from the card reader into the USB connector located on the side of the printer dock. NOTE: If the card reader is already plugged in but the connection has timed-out, disconnect then reconnect the USB cable to re-establish a connection.
		3. Insert the camera card into the card reader.
		4. Press to begin printing, or press to cancel.

Previous Next