Kodak EasyShare DX7590 zoom digital camera — User's guide


Table of Contents > Getting started > Setting the date and time

1 Getting started

Setting the date and time

Setting the date & time, first time

The message Date and Time have been reset appears the first time you turn on the camera or if the battery is removed for an extended time.

  1. SET DATE & TIME is highlighted. Press the OK button.

  2. Go to step 4 in Setting the date & time, anytime.

Setting the date & time, anytime

  1. Turn on the camera. Press the Menu button.

  2. Move the Joystick to highlight Setup Menu , then press the OK button.

  3. Move the Joystick to highlight Date & Time , then press the OK button.

  4. Move the Joystick to adjust the date and time. Move the Joystick to advance to the next setting.

  5. When finished, press the OK button.

  6. Press the Menu button to exit the menu.

NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera clock when you connect the camera. See the EasyShare software Help for details.



Previous Next