Kodak EasyShare-One zoom digital camera — User's guide

Synchronization/ transfer stops or does not start

• The computer has entered standby or hibernation.

• The camera is disconnected (during authentication and setup), possibly due to:

  • Camera turning off

  • Distance (weak signal)

  • Interference (such as a microwave oven or a cordless telephone)

  • The wireless router shutting down

  • Wi-Fi card not properly inserted

• Synchronization/transfer is not set in EasyShare software (see EasyShare software Help for details).

• Set up and authenticate the camera on EasyShare software (see EasyShare software Help for details).

Synchronization/ transfer is slow

• The network is slow possibly due to:

  • Distance (weak signal)

  • Interference (such as a microwave oven or a cordless telephone)

• The computer is slow, possibly due to:

  • Processing other tasks

  • Disk space is full

  • Low processor speed

• The wireless router is set to slow transfer rate.

Incomplete transfer or missing images

• There is not enough disk space left on the computer.

• The transfer was interrupted (see above).