Kodak EasyShare C340 zoom digital camera — User's guide


Table of Contents > Troubleshooting > Camera ready light status

5 Troubleshooting

Camera ready light status

If...

Try one or more of the following

Ready light does not turn on and the camera does not work

  • Turn on the camera ().

  • Recharge the battery or install a new one ().

  • Mode dial was on when battery was reloaded. Turn Mode dial off, then back on.

Ready light blinks green

  • Picture is being processed and saved to the camera. Camera is operating normally.

  • Camera is connected. Camera is operating normally.

Ready light blinks red and camera turns off

  • Recharge the battery or install a new one ().

Ready light glows steady green

  • Shutter button is pressed halfway down. Focus and exposure are set. Camera is operating normally.

Ready light glows steady orange

  • The Mode dial is set to Favorites. Camera is operating normally.

Ready light blinks orange

  • Flash is not charged. Wait. Resume picture taking when the light stops blinking and turns off.

  • Auto exposure or auto-focus are not set. Release the Shutter button and recompose the picture.

Ready light glows steady red

  • Camera's internal memory or card is full. Transfer pictures to the computer (), delete pictures from camera (), switch image storage locations (), or insert card with available memory ().

  • Camera processing memory is full. Wait. Resume picture-taking when the light turns off.

  • Card is read-only. Change image storage location to internal memory (), or use a different card.



Previous Next