Kodak EasyShare photo printer 500 — User's Guide


Table of Contents > Using the photo printer with a computer > Transferring pictures from a USB device

4 Using the photo printer with a computer

Transferring pictures from a USB device

  1. Make sure Kodak EasyShare software is installed (see Installing the software) and the photo printer is connected to your computer (see Connecting to a computer).


  2. Plug the USB connector from the USB device into the USB connector located on the side of the photo printer.

NOTE: If the USB device is already plugged in but no longer recognized, disconnect then reconnect it to re-establish the connection.

  3. Press the Transfer button on the photo printer.

Kodak EasyShare software opens on your computer.

  4. Use Kodak EasyShare software to transfer pictures from the device to your computer. See the Kodak EasyShare software Help for details.

The Transfer light blinks while the pictures are being transferred.



Previous Next