Kodak EasyShare Z650 zoom digital camera — User's guide


Table of Contents > Troubleshooting > Picture quality problems

5 Troubleshooting

Picture quality problems

If... Try one or more of the following

Picture is too dark

  • Reposition camera for more available light.

  • Use Fill flash (Changing the flash settings) or change your position so light is not behind the subject.

  • Move so that the distance between you and the subject is within the effective flash range (Using the flip-up flash).

  • To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.

  • Adjust exposure compensation (Adjusting exposure compensation).

Picture is too light

  • Reposition camera to reduce the amount of available light.

  • Turn flash off (Using the flip-up flash).

  • Move so that the distance between you and the subject is within the effective flash range (Using the flip-up flash).

  • To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.

  • Use P mode to adjust the Exposure.

Picture is not clear

  • To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator turns green, press the Shutter button completely down to take the picture.

  • Clean the lens (Additional care and maintenance).

  • Make sure camera is not in Close-up mode if you are more than 27.6 in. (70 cm) from your subject.

  • Place the camera on a flat, steady surface or use a tripod, especially in high-zoom settings or in low light.



Previous Next