Kodak EasyShare Z710 zoom digital camera — User's guide

Table of Contents > Working with pictures/videos > Running a slide show

---

3 Working with pictures/videos

Running a slide show

Use the Slide Show to display your pictures and videos on the camera. To run a slide show on a television or on any external device, see Displaying pictures and videos on a television. To save battery power, use an optional Kodak 3-volt AC adapter. (Visit www.kodak.com/go/z710accessories.)

Starting the slide show

1. Press the Review button, then press the Menu button.

2. Press to highlight Slide Show, then press the OK button.

3. Press to highlight Begin Show, then press the OK button.

   Each picture and video is displayed once.
   
   

To interrupt the Slide Show, press the OK button.

Changing the slide show display interval

The default interval setting displays each picture for 5 seconds. You can set the display interval from 3 to 60 seconds.

1. On the Slide Show menu, press to highlight Interval, then press the OK button.

2. Select a display interval.

   To scroll through the seconds quickly, press and hold .

3. Press the OK button.

   The interval setting remains until you change it.
   
   

Displaying pictures and videos on a television

You can use an optional A/V cable to display pictures and videos on a television, computer monitor, or any device equipped with a video input. To purchase accessories, visit www.kodak.com/go/z710accessories.

NOTE:

Image quality on a television screen may not be as good as on a computer monitor or when printed. Ensure that the Video Out setting (NTSC or PAL) is correct. (See Video Out in the table that starts on Customizing your camera.)

1. Connect an audio/video cable from the camera A/V Out/USB port to the television video-in port (yellow) and audio-in port (white). See your television user's guide for details.

2. Review pictures and videos on the television.

Previous Next