Kodak EasyShare Z885 zoom digital camera — User's guide

Table of Contents > Working with pictures/videos > Running a slide show

---

3 Working with pictures/videos

Running a slide show

Use Slide Show to display your pictures/videos on the LCD. During a slide show, you can adjust the volume on a sound tag you recorded (see Using sound tags).

Starting the slide show

1. Press the Review button, then the Menu button.

2. Press to highlight Slide Show, then press the OK button.

3. Press to highlight Begin Show, then press the OK button.

   Each picture/video is displayed once.
   
   

To interrupt the Slide Show, press the OK button.

Changing the slide show display interval

The default interval setting displays each picture for 5 seconds. You can set the display interval from 3–60 seconds.

1. On the Slide Show menu, press to highlight Interval, then press the OK button.

2. Select a display interval.

   To scroll through the seconds quickly, press and hold .

3. Press the OK button.

   The interval setting remains until you change it.
   
   

Running a continuous slide show loop

When you turn on Loop, the slide show is continuously repeated.

1. On the Slide Show menu, press to highlight Loop, then press the OK button.

2. Press to highlight On, then press the OK button.

3. Press to highlight Begin Show, then press the OK button.

   The slide show repeats until you press the OK button or until battery power is exhausted. The Loop feature remains until you change it.
   
   

Displaying pictures/videos on a television

You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. To connect the camera to a television, use the A/V (audio/video) cable (may be sold separately).

NOTE:

Ensure that the Video Out setting (NTSC or PAL) is correct ( ). The slide show stops if you connect a cable while the slide show is running. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

Previous Next