Kodak EasyShare Z812 IS zoom digital camera — User's guide
Table of Contents >
Doing more with your camera > P, A, S, and M modes
4 Doing more with your camera
Use these modes when you want more control over your camera and pictures.
Mode
|
When to use
|
Press Jog dial to control
|
|
Program mode offers the ease of auto shooting with full access to all menu options. The camera automatically sets the shutter speed and aperture (f-stop) based on the scene lighting.
|
Exposure compensation (how much light enters the camera), flash compensation, and ISO speed
|
|
Use Aperture Priority mode to control depth of field (the range of sharpness). The aperture setting may be affected by optical zoom.
|
Aperture, exposure compensation, flash compensation, and ISO speed
|
|
Shutter Priority mode is primarily used to prevent blur when your subject is moving. The camera automatically sets the aperture for proper exposure. (To prevent blur, use a tripod for slow shutter speeds.)
|
Shutter speed, exposure compensation, flash compensation, and ISO speed
|
|
Manual mode offers the highest level of creative control. (To prevent blur, use a tripod for slow shutter speeds.)
|
Aperture, shutter speed, flash compensation, and ISO speed
|
NOTE: |
Settings you change in P, A, S, or M modes apply only to pictures taken in those modes. The settings, including Flash, are maintained for P, A, S, and M modes—even when you change modes or turn off the camera. Use Reset Camera (
) to reset P, A, S, or M mode to its default setting. |
PASM modes control the aperture (f-number, also known as f-stop), shutter speed, exposure compensation, flash compensation, and ISO. Use the Menu button to control all other settings.
-
Turn the Mode dial to P, A, S, or M.
-
Jog dial: Turn to access a setting. Press to unlock the setting. Turn to edit the setting. Press to lock the setting. (See P, A, S, and M modes.)
|
|
|
ISO - adjust the camera's sensitivity to light. Higher ISO indicates greater sensitivity.
NOTE: |
A higher ISO may produce unwanted "noise" in a picture. ISO 3200 is available only in 2.2, 2.1, and 1.2 MP picture sizes. |
Flash Compensation - adjust flash brightness.
Exposure Compensation - adjust the exposure. If the picture is too light, decrease the setting; if it's too dark, increase the setting.
Shutter speed - control how long the shutter stays open. A shaking hand icon warns of slow shutter speeds. (Use a tripod for slow shutter speeds.)
Aperture
- (also known as f-stop) control the size of the lens opening, which determines the depth of field.
-
Smaller f-stop numbers indicate a larger lens opening; good for low-light.
-
Larger f-stop numbers indicate a smaller lens opening; keeps the main subject sharp; good for landscapes and well-lit conditions.
|
Previous
Next