Kodak EasyShare M820/M1020 digital frame — Extended user guide


Table of Contents > Doing more with your frame > Printing pictures

3 Doing more with your frame

Printing pictures

Your frame is compatible with PictBridge technology, so you can print directly to PictBridge enabled printers.


  1. Turn off the frame and printer.

  2. Make sure your frame is disconnected from the printer.

  3. On the frame, change your connection mode from Computer to Printer. See Manually changing USB connection mode.

  4. Reconnect your frame to the printer, using the USB cable.

Printing to a PictBridge enabled printer

  1. Turn on the printer. Turn on the frame.

  2. From a slide show (tap the touch-sensitive border to pause the slide show and display the icons) or from single view:

  • Tap (Menu), then (Print).

Printing begins.

If you are in thumbnails (multi-up) view:

  • Slide to select a picture, or see Selecting multiple pictures to select multiple pictures.

  • Tap (Menu).

    If you selected multiple pictures to print, they appear on the screen.

  • Tap (Print), then Yes to start printing.

NOTE: Remember to change your connection mode back to Computer when you are done (see Manually changing USB connection mode).

Manually changing USB connection mode

The connection mode must match the device you connect the frame to: Computer or Printer. The default is Connect to computer. You can change the connection mode manually.

  1. Disconnect the printer or computer from the frame.

  2. On the frame, tap (Home).

  3. Tap (Settings).

  4. Slide to highlight Device configuration, then tap OK.

  5. Highlight USB connection mode, then tap OK.

  6. Slide to highlight the mode you want to connect to, printer or computer, then tap OK.

  7. Reconnect the device (printer or computer) that matches the connection mode.



Previous Next