KODAK OLED Wireless Frame — Extended user guide


Table of Contents > Changing settings and more > Upgrading your firmware (recommended)

7 Changing settings and more

Upgrading your firmware (recommended)

Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

Automatically upgrade firmware from the Internet

When the frame is connected to your wireless network, you receive an automatic notice from the Internet whenever a new firmware version is available for your frame.

When the notice appears, select one of the screen options:

  • Install now (to upgrade right away)-Select, then press OK to start the upgrade.

    When the upgrade is complete, your frame automatically restarts. If it doesn't, press the power switch on the frame to Off, then back to On.

    IMPORTANT: Do not turn off the frame during the upgrade!

  • Remind me later (to upgrade later)-Select, then press OK.

    The upgrade message disappears, then appears again the next time you turn on the frame.

  • No thanks (to dismiss the message)-Select, then press OK.

    The upgrade message disappears. You will not be reminded again about this firmware version. A new message appears when the next firmware version is available.

    To change your mind and upgrade to this firmware version at your convenience, see Manually upgrade firmware.

Manually upgrade firmware

Download the firmware to your computer, then upgrade your frame:

  1. On your computer, go to www.kodak.com/go/digitalframedownloads.

  2. Follow the screen directions to download the frame firmware to your computer.

  3. Copy the IMG file to the root directory (not in a folder or subfolder) of a memory card or USB flash drive, then insert into the frame. See Copying on your frame for copying files.

  4. Tap (Home), then tap (Settings).

  5. Highlight Firmware Upgrade, then tap OK to begin the upgrade.

    IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive during the upgrade!

    When the upgrade is complete, your frame automatically restarts. If it doesn't, press the power button on the frame to Off, then back to On.



Previous Next