Kodak ESP 9 All-in-One Printer — User Guide

Table of Contents > Viewing and Printing Photos > Viewing photos

---

5 Viewing and Printing Photos

Viewing photos

Insert one of the following devices into the appropriate opening:

NOTE:

Always use the USB host port on the front of the printer. To avoid an error, use only one slot or port at a time.

Device Type	Printer Slot
Memory Card	Memory Card Reader
Portable Storage Drive	USB port
Digital Camera	USB port
Kodak Bluetooth dongle	USB port

NOTE:

If Tagged Image Printing is enabled on this printer (see Configuring printer settings), it detects a Digital Print Order Format (DPOF) file when you insert a memory card. The printer LCD screen prompts you to verify that you want to print tagged images. See Printing tagged images.

Most memory cards will work with this printer. When you insert a memory card, or connect a camera or portable flash drive to the printer, the last photo taken is displayed first.

CAUTION: Do not insert more than one device, such as a USB thumb drive or memory card, into the printer at a time, or you will get an error message. Also, never remove or disconnect a memory card from its slot unless the blue light near the slot is not blinking.

NOTE:

Photos stored on a PictBridge camera are displayed on the camera's LCD screen only. See Printing photos from a PictBridge camera, as needed.

Previous Next