KODAK EASYSHARE W820/W1020 Wireless Digital Frames — Extended user guide
Table of Contents > Doing more with your frame > Printing pictures
5 Doing more with your frame
Printing pictures
NOTE: | The print icon is available on your frame when you connect your printer. |
Your frame is compatible with PICTBRIDGE Technology, so you can print directly to PICTBRIDGE enabled Printers.
|
1.
Turn off the frame and printer.
|
||
2.
Make sure your frame is disconnected from the printer.
|
|||
3.
Turn on the frame, then change your connection mode on your frame from Computer to Printer. See Manually changing USB connection mode.
|
|||
4.
Reconnect your frame to the printer, using the USB cable.
|
Printing to a PictBridge enabled Printer
1.
Turn on the printer. Turn on the frame.
|
|||||
2.
From a slide show (tap the touch-sensitive border to pause the slide show and display the icons) or from single view:
If you are in thumbnails (multi-up) view:
|
Manually changing USB connection mode
The connection mode must match the device you connect the frame to: Computer or Printer. The default is Connect to computer. You can change the connection mode manually.
-
Disconnect the printer or computer from the frame.
-
On the frame, tap (Home).
-
Tap (Settings).
-
Slide to highlight Device configuration, then tap Select.
-
Highlight USB connection mode, then tap Select.
-
Slide to highlight the mode you want to connect to, printer or computer, then tap Save.
-
Reconnect the device (printer or computer) that matches the connection mode in step 6.
Previous Next