KODAK SLICE Touchscreen Camera — Extended user guide


Table of Contents > Reviewing, tagging, editing > Tagging pictures so that they are easier to find

3 Reviewing, tagging, editing

Tagging pictures so that they are easier to find

Tag pictures to make them easy to find, later. You can tag people, locations, or keywords. For example, the camera can find all pictures that contain "Mary," or "Philadelphia," or "Dad's 60th Birthday."

Assigning people tags to pictures

  1. Press the Review button. Tap the left/right side of the screen (or swipe) to find a picture that contains faces.

  2. Tap the Tag icon, tap Tag People, then tap Apply Tags.

    A Name box is superimposed over each detected face (up to 5).

  3. If the camera recognizes a face, confirm it. (If you do nothing, the camera assumes that the names are correct.) If the camera is not correct, tap the Name box, then choose an existing name or type a new one.

    NOTE: If you tap an incorrect letter, and your finger is still pressing that letter, slide it to the correct letter. You can also use the Backspace key to delete characters.

  4. Repeat these steps to assign names to other faces. When finished, tap X.

Assigning keyword tags to pictures

  1. Press the Review button, then find a picture to tag.

  2. Tap the Tag icon, then tap Keyword Tag.

  3. Tap an existing keyword or tap Add New (see Add a new keyword tag).

Add a new keyword tag

  1. Press the Review button, then the Menu button.

  2. Tap Keyword Tag, then tap New Tag.

  3. Tap each letter. When finished, tap X.

    NOTE: If you tap an incorrect letter, and your finger is still pressing that letter, slide it to the correct letter. You can also use the Backspace key to delete characters.

Assigning location tags to pictures

  1. Press the Review button, then find a picture to tag.

  2. Tap the Tag icon, then tap Location.

  3. Tap Enter New Location (see Adding a new location)or tap Recent Locations.

  4. Repeat these steps to assign a location to other pictures. When finished, tap X.

Adding a new location

The keyboard appears when you need to type.

  1. Begin typing.

    The camera find matches. Keep typing, or tap the desired location. Alternatively, tap Recent Locations, then tap the desired location.

    NOTE: If you tap an incorrect letter, and your finger is still pressing that letter, slide it to the correct letter. You can also use the Backspace key to delete characters.

  2. When finished, tap Done.



Navteq is a trademark in the U.S. and other countries.

Pre-tagging, for pictures/videos you take next

Use the Preset Keyword Tag feature to assign a keyword tag to the next pictures/videos you take. First, create a new keyword tag. Assigning keyword tags to pictures Then:

  1. Tap the Menu icon.

  2. Tap Preset Keyword Tag or Preset Location Tag.

  3. Tap a Keyword (or add one, Add a new keyword tag) or a Location (or add one, Adding a new location).

  4. Tap X to return to the main menu. Tap X again to exit the menu.

    The selected tag is displayed on the LCD. The tag is applied to new pictures/videos.

Stop tagging future pictures/videos

To stop the tag from being assigned to future pictures/videos:

  1. Tap the Menu icon.

  2. Keywords: Tap Preset Keyword Tag, then tap an active keyword to clear it (or tap Clear All).

    Locations: Tap Preset Location Tag, then tap an active location to clear it (or tap Clear Location).

  3. Tap Exit.

To access the camera Help system, see Getting help from your camera.



Previous Next