KODAK ESP C310 All-in-One Printer — Extended User Guide


Table of Contents > Copying > Copying a document

7 Copying

Copying a document

You can copy a document using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a document

The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see ).

To copy a document using the current default settings:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press Home.

  4. Press Start to begin copying.

Adjusting the settings and copying a document

To copy a document using settings other than the default settings:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press Home.

  4. With Copy Document selected, press OK.

  5. Press to select an option, then press or to change the setting.

    Copy Document Option Setting Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Color

    Color (default)

    Prints full color.

    Black & White

    Prints black and white (grayscale).

    Copy Size

    Same Size (default)

    The copy is the same size as the original.

    Fit to Page

    The printer detects the size of the original on the scanner glass and the size of the paper in the paper tray, and automatically reduces or enlarges the original so that the copy fits on the paper.

    20% to 500%

    Reduces down to 20% or enlarges up to 500% of the original size.

    Plain Paper Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed.

    Draft

    The fastest print speed, but the lowest quality.

    Photo Paper Quality

    Auto. (default)

    The printer detects photo paper in the paper tray and sets Best quality automatically.

    Brightness

    Normal, -3 to +3 (Normal is default)

    Lightens or darkens the copy. Normal is no change from the original; -3 is the darkest; +3 is the lightest.

    Save as Defaults

    No / Yes

    To save the settings as the new default, press OK. With Yes selected, press OK.

  6. Press Start to begin copying.

Changing the number of copies of a document

To change the number of copies:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press Home.

  4. With Copy Document selected, press or to select a number.

  5. Press Start to begin copying.

Enlarging or reducing a document

To enlarge or reduce the size of the copy:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press Home.

  4. With Copy Document selected, press OK.

  5. Press to select Copy Size.

  6. Press or to select an enlargement or reduction.

  7. Press Start to begin copying.


Darkening or lightening a copy

To darken or lighten the copy:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press Home.

  4. With Copy Document selected, press OK.

  5. Press to select Brightness.

  6. Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

  7. Press Start to begin copying .



Previous Next