Problem
|
Try one or more of the following
|
My digital frame screens are in the wrong language.
|
-
Touch Back
until the language screen is displayed. Reselect your language.
-
On your computer, sign on to your kodakpulse.com account, click Frame Settings -> Advanced, and select your language from the drop-down list.
-
Reset your digital frame. Press the Power and Health Check buttons at the same time.
IMPORTANT: |
Resetting the digital frame deletes all pictures, deactivates the digital frame from your kodakpulse.com account, and returns all settings to factory defaults. |
The digital frame is reset and returns to the initial language screen. See Setting your language to reselect you language, reconnect to your wireless network, and reactivate the digital frame.
|
Pictures downloaded to my digital frame from kodakpulse.com don't arrive or arrive slowly.
|
-
Please be patient. There may be a delay before the pictures begin playing on your digital frame. Download times can vary due to the number of pictures, size of picture files, your Web connection speed and geographical location. Also, the first download to your digital frame is usually more delayed than subsequent downloads.
-
Your router signal may be weak. Try moving your digital frame closer to, or into the same room with, your router. To check your router signal strength, press Health Check (Checking wireless network status).
|
The digital frame does not turn on.
|
-
Make sure the power cable that was included with your digital frame is connected securely (see Attaching the power cable).
-
Unplug the power cable for 5 seconds, then reconnect the cable. If the digital frame does not turn on automatically, press the Power button.
|
I cannot exit the sample picture slide show.
|
|
The digital frame turns on or off by itself.
|
-
The energy saver schedule is enabled. To change on/off times or to disable this feature, go to www.kodakpulse.com, sign in to your account, then click the Frame Settings tab.
-
The activity sensors in your PULSE Digital Frame may be learning your home environment's light and sound levels. See Learning more about activity sensors.
|
The digital frame turns on or off at unexpected times.
|
The digital frame freezes or doesn't work properly
.
|
-
Press the Health Check button on the back of the digital frame (Opening the Health check screen). If a problem is indicated on the network status screen, press Fix it and follow the screen directions. If no network problem is indicated, press Exit to return to slide show.
-
The digital frame's transition time may be set for 30 minute, fade or Smart. See Changing transition type and time.
-
Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the Power button (for about 2 seconds), then release.
|
My digital frame activation code is no longer displayed.
|
|
Nothing happens when a memory card or USB device is connected.
|
-
Insert a certified SD, SDHC, MMC, XD, or MS card, with images, into the upper designated card slot, then push to seat it (see Viewing pictures from a memory card or USB device).
-
Insert a certified MS Duo or MS PRO Duo card, with images, into the lower designated card slot only, then push to seat it (see Viewing pictures from a memory card or USB device).
NOTE: |
Do not insert an MS Duo or MS PRO Duo card in the top slot. It may be difficult to remove. |
-
Make sure the USB device is connected securely (see Viewing pictures from a memory card or USB device).
-
Make sure the file format of your pictures is supported (see PULSE Digital Frame specifications).
NOTE: |
Pictures may take a longer time to display when the files are large or when using a large capacity memory card or other connected device. |
|