KODAK ESP C315 All-in-One Printer — User's Manual


Table of Contents > Maintaining Your Printer > General care and cleaning

9 Maintaining Your Printer

General care and cleaning

CAUTION:
Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners on any part of the printer.
  • To clean the printer, wipe the outside with a clean, dry cloth.

  • Keep the surrounding area vacuumed and litter-free.

  • Protect the printer from tobacco smoke, dust, and liquid spills.

  • Do not place objects on the printer.

  • Keep the input tray free of dust, dirt, and other foreign objects.

  • Keep the printer supplies away from direct sunlight and out of high-temperature environments.

  • Do not allow chemicals to come into contact with the printer.

Cleaning the scanner glass and document backing

The scanner glass can get smudged and minor debris can accumulate on the white document backing under the scanner lid. Periodically clean the scanner glass and document backing.

CAUTION:
Do not use harsh or abrasive cleaners on any part of the printer. Do not spray liquid directly on the glass. Do not use paper-based wipes on the document backing as they can scratch it.

To clean the scanner glass and document backing under the scanner lid:

  1. Turn off the printer and unplug it from the power outlet.

  2. Lift the scanner lid.  



  3. Wipe the glass with a soft cloth or sponge, slightly moistened with a nonabrasive glass cleaner.



  4. Dry the glass with a lint-free cloth.

  5. Gently clean the document backing with a soft cloth or sponge, slightly moistened with mild soap and warm water.



  6. Dry the document backing with a chamois or lint-free cloth.

    NOTE: If the document backing needs further cleaning, use isopropyl (rubbing) alcohol on a soft cloth, then wipe thoroughly with a cloth moistened with water to remove any residual alcohol.

  7. When you finish cleaning , plug in the printer and press the on/off button to power on the printer.



Previous Next