KODAK HERO 7.1 All-in-One Printer — Extended User Guide
Table of Contents > Copying > Copying a document
7 Copying
Copying a document
You can copy a document using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies. When you copy a document, the printer will always use paper from the main (bottom) paper tray.
Using the default settings to copy a document
The default settings are either the factory default settings (Resetting factory defaults), or defaults that you have set on the printer ().
To copy a document using the current default settings:
-
Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press .
-
Touch Copy Document.
-
Press to begin copying.
Adjusting the settings and copying a document
-
Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press .
-
Touch Copy Document, then touch Options.
-
Touch or , then touch the setting you want to change.
Changing the number of copies of a document
-
Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press .
-
Touch Copy Document.
-
Touch or to select a number.
-
Press to begin copying.
Enlarging or reducing the size of a copy
-
Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press .
-
Touch Copy Document, then touch Options.
-
Touch Copy Size.
-
Touch an enlargement or reduction selection.
-
Press to begin copying.
Darkening or lightening a copy
-
Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.
-
Close the lid.
-
Press .
-
Touch Copy Document, then touch Options.
-
Touch to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.
Previous Next