KODAK HERO 2.2 All-in-One Printer — Extended User Guide


Table of Contents > Copying > Copying a photo

7 Copying

Copying a photo

You can copy a photo using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a photo

The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a photo).

  1. Lift the scanner lid, and place the original photo face down in the right front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press .

  4. Press to select Copy Photo.

  5. Press .

Adjusting the settings and copying a photo

  1. Lift the scanner lid, and place the original photo face down in the right-front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the scanner lid.

  3. Press .

  4. Press to select Copy Photo, then press OK.

  5. Press to select an option, then press or to change the setting.

    Copy Photo Option Settings Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Color

    Black & White

    Makes a black and white copy.

    Color

    Makes a color copy.

    Copy Size

    2 x 3

    3.5 x 5

    4 x 6 (default)

    4 x 7

    4 x 8

    5 x 7

    4 x 12

    8 x 10

    8.5 x 11 or A4

    The printer enlarges or reduces the original to make it the copy size you select.

    If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size.

    Plain Paper Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed.

    Draft

    The fastest print speed, but the lowest quality.

    Photo Paper Quality

    Auto. (default)

    The printer detects photo paper in the paper tray and sets Best quality automatically.

    Brightness

    Normal, –3 to +3 (Normal is default)

    Lightens or darkens the copy. Normal is no change from the original; –3 is the darkest; +3 is the lightest.

    Preview

    No (default) / Yes

    To see a preview of the photograph on the LCD, select Yes.

    Save as Defaults

    No / Yes

    To save settings as the new default, press OK , select Yes , then press OK .

  6. Press .

Changing the number of copies of a photo

  1. Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the lid.

  3. Press .

  4. Press to select Copy Photo, then press OK.

  5. Press or to select a number.

  6. Press to begin copying.

Enlarging or reducing the size of a copy of a photo

  1. Lift the scanner lid, and place the photo face down in the right-front corner of the scanner glass.



    IMPORTANT: Do not load photos in the Automatic Document Feeder (ADF).

  2. Close the lid.

  3. Press .

  4. Press to select Copy Photo, then press OK.

  5. Press to select Copy Size, then press or to change the size.

  6. Press to begin copying.



Previous Next