Kodak EasyShare printer dock 6000 — User's Guide

Table of Contents > Reviewing Pictures and Videos > Running a Slide Show

---

4 Reviewing Pictures and Videos

Running a Slide Show

Use the Slide Show to automatically review your pictures and videos, and to display pictures and videos on a television screen (see Displaying Pictures and Videos on a Television).

1. Make sure the power is connected to the printer dock (see Connecting the Power).

2. Place the Kodak EasyShare camera in the printer dock (see Docking and Charging the Camera).

3. Press the Slide Show button .

   The pictures and videos are displayed in the order in which you took them. The slide show is finished when "The End" appears on the screen.
   
   

   • To manually navigate through pictures and videos during the slide show, press the arrow keys on the printer dock.

   • To select images to print during the slide show, press the Print button and select the number of copies to print.

     IMPORTANT:

     If, after you press the Print button, you decide not to print the picture, select 0 on the copies screen before resuming the slide show.

     
     

   • To resume the slide show, press the Print button again or press the Slide Show button . If neither button is pressed, after a short time the slide show resumes automatically.

   • To cancel the slide show, press and hold the Slide Show button until "The End" appears on the screen.

     When the slide show ends, all the pictures you selected are printed.
     
     

Changing the Slide Show Display Interval

Use your Kodak EasyShare camera settings to change the length of time slides are displayed in the slide show. See your camera user's guide for details.

Running a Continuous Slide Show Loop

When you turn on Loop on your Kodak EasyShare camera, the slide show is continuously repeated. See your camera user's guide for details.

• To cancel the slide show, press and hold the Slide Show button until "The End" appears on the screen.

Previous Next