Kodak EasyShare printer dock 6000 — User's Guide
Table of Contents > Troubleshooting > Printer Dock Status Lights
7 Troubleshooting
Printer Dock Status Lights
Cartridge Light | ||
---|---|---|
Light Status | Cause | Action/Solution |
Light glows steady red |
The color cartridge is depleted. |
Install a new color cartridge (Loading the Color Cartridge). |
Light blinks red |
The color cartridge is improperly installed. |
Remove and re-install the color cartridge (Loading the Color Cartridge). |
There is a color cartridge jam. |
Install a new color cartridge (Loading the Color Cartridge). |
|
Light off |
The color cartridge is properly installed. |
None required. |
Paper Light | ||
---|---|---|
Light Status | Cause | Action/Solution |
Light glows steady red |
The paper tray is empty. |
Load paper (Loading the Paper). |
Light blinks red |
The paper tray is improperly installed. |
Remove the paper tray, check that paper is properly loaded, and re-install (Loading the Paper). |
There is a paper jam. |
Clear the paper jam (Clearing a Paper Jam). |
|
Light off |
The paper tray is properly installed and has an ample supply of paper. |
None required. |
Battery Charging Lights | ||
---|---|---|
Light Status | Cause | Action/Solution |
No lights |
Camera is not properly seated in the printer dock. |
Place the camera in the printer dock (Docking and Charging the Camera) or readjust the camera placement. |
Camera is turned on. |
Turn off the camera. |
|
Correct battery is not installed. |
Install a Kodak EasyShare Ni-MH rechargeable battery pack or Kodak EasyShare Li-Ion rechargeable battery (Loading the Camera Battery). |
|
Green lights |
Battery is less than half charged. |
Leave camera on dock to continue charging. |
Battery is more than half charged. |
||
Battery is fully charged. |
Leave camera on the dock to maintain charge. |
|
One green light
|
Camera was placed in camera dock. |
None; dock is checking the charge status of the battery. |
Red light (blinking)
|
Battery is not properly installed. |
Re-install the battery. |
Battery or connector pin is damaged. |
Check for damage. |
|
Camera and battery have been exposed to extreme temperatures. |
Slowly return the camera and battery to room temperature. |
Print Mode Lights | ||
---|---|---|
Light Status | Cause | Action/Solution |
One light glows steady green |
The respective print option is available and selected. |
None required. To change modes, push the Print mode button repeatedly (Indicator Lights and Buttons). |
All lights are off
|
There are no pictures in the camera. |
|
The camera is in (auto power-off). |
Press the Print button or any button. |
Print Light | ||
---|---|---|
Light Status | Cause | Action/Solution |
Light glows steady green |
The printer dock is ready for printing. |
None required. |
Light blinks green |
The printer dock is printing. |
Transfer Light | ||
---|---|---|
Light Status | Cause | Action/Solution |
Light glows steady green |
The printer dock is ready for transferring pictures. |
None required. |
Light blinks green |
Pictures are being transferred to the computer. |
|
Light is off
|
There are no pictures in the camera. |
None required. |
The camera is not in the printer dock or is improperly seated. |
Place the camera in the printer dock (Docking and Charging the Camera) or readjust the camera placement. |
|
The printer dock is not connected to the computer. |
Connect the printer dock to the computer (Using the Printer Dock with a Computer). |
|
The camera is in auto power-off. |
Press any button. |
|
The printer dock is either printing in standalone mode or running a slide show. |
The Transfer button is disabled. |
|
The computer is not running. |
Turn on the computer. |
Previous Next