Kodak EasyShare DX4530 zoom digital camera — User's Guide

Pictures are not transferred to the computer

AC adapter or USB cable is not securely connected.

Check the connections (Connecting the Camera Dock).

Software is not installed.

Install the software (Installing the Software).

Computer needs to be restarted.

Restart the computer and try again.

Camera was removed from the camera dock during picture transfer.

Replace the camera on the camera dock and press the Connect button.

Connect button was not pressed.

Press the Connect button.

Light glows steady green

Camera is properly seated in the camera dock.

The camera and camera dock are operating normally.

Light blinks green

Pictures and videos are being transferred to the computer.

Light is off

Camera is not properly seated in camera dock.

Remove the camera and re-seat it (Docking the Camera).

No lights

Charging has not started.

The camera is not seated in the camera dock (Docking the Camera).

Camera is turned on. Turn off to begin charging.

Rechargeable battery is not installed in camera.

One green light

Battery is low.

The camera is charging.

Two green lights

Battery is partially charged.

Three green lights

Battery is fully charged.

Charging resumes when necessary.

One blinking red light

Battery is installed incorrectly.

Reinstall the battery (Installing the Battery in the Camera).

The battery or connector pins are damaged.

Check for damage.

The camera and battery have been exposed to very high or low temperatures.

Slowly return the camera and battery to room temperature.