Kodak EasyShare CX7430 zoom digital camera — User's guide
Table of Contents > Troubleshooting > Camera ready light status
7 Troubleshooting
Camera ready light status
Status | Cause | Solution |
---|---|---|
Ready light does not turn on and the camera does not work.
|
Camera is not turned on. |
Turn on the camera (Turning the camera on and off). |
Battery is exhausted. |
Recharge the battery or install a new one (Loading the batteries). |
|
Mode dial was on when batteries were reloaded. |
Turn Mode dial off, then back on. |
|
Ready light blinks green. |
Picture is being processed and saved to the camera. |
Camera is operating normally. |
Ready light blinks orange. |
Flash is not charged. |
Wait. Resume picture taking when the light stops blinking and turns off. |
Auto exposure or auto-focus are not locked. |
Release the Shutter button and recompose the picture. |
|
Ready light blinks red and camera turns off.
|
Battery is low or exhausted. |
Recharge the battery or install a new one (Loading the batteries). |
Ready light glows steady red. |
Camera's internal memory or card is full. |
Transfer pictures to the computer (Connecting camera to computer), delete pictures from the camera (Deleting pictures and videos), switch storage locations (), or insert a card with available memory (Storing pictures on an SD/MMC card). |
Camera processing memory is full. |
Wait. Resume picture taking when the light turns off. |
|
Card is read-only. |
Change storage location to internal memory (), or use a different card. |
|
Ready light glows steady green |
Shutter button is pressed halfway down. Focus and exposure are set. |
Camera is operating normally. |
Ready light glows steady orange |
The Mode dial is set to Favorites. |
Camera is operating normally. |
Previous Next