Kodak EasyShare CX7430 zoom digital camera — User's guide


Table of Contents > Troubleshooting > Camera screen messages

7 Troubleshooting

Camera screen messages

Message Cause Solution

No images to display

There are no pictures in the current storage location.

Change picture storage location setting ().

Memory card requires formatting

The card is corrupted or formatted for another digital camera.

Insert a new card or format the card ().

Caution: Formatting deletes all pictures and videos, including protected files.

Memory card cannot be read (Please format memory card or insert another memory card)

Remove USB cable in camera

Restart computer if needed

USB cable is connected to camera.

Unplug the USB cable from the camera.

Internal memory requires formatting

The camera internal memory is corrupted.

Format the internal memory ().

Caution: Formatting deletes all pictures and videos, including protected files. (Formatting internal memory also deletes email addresses, album names, and favorites. To restore them, see Kodak EasyShare software Help.)

Internal memory cannot be read (Please format internal memory)

No memory card (Files not copied)

There is no card in the camera. Pictures were not copied.

Insert a card (Storing pictures on an SD/MMC card).

Not enough space to copy files (Files not copied)

There is not enough space in the location you are copying to (internal memory or the card).

Delete pictures from the location you are copying to (Deleting pictures and videos), or insert a new card.

Memory card is locked (Insert a new memory card)

The card is write-protected.

To take a picture, insert a new card or change storage location to internal memory ().

Memory card is unusable (Insert a new memory card)

The card is slow, corrupted, or unreadable.

Insert a new card or format the card ().

Memory card speed is slow. Record video in internal memory or change card.

This card cannot be used to take videos.

Change storage location to internal memory (). Use this card to take pictures only.

Date and time have been reset

This is the first time you turned on the camera; or you removed the batteries for an extended time; or the batteries are exhausted.

Reset the clock (Setting the date and time).

No address book on camera (Connect with computer to import address book)

No email addresses appear because there is no address book.

Create and copy address book from computer. See EasyShare software Help.

No album names on camera (Connect with computer to import album names)

Album names have not been copied to the camera from the computer.

Create and copy album names from computer. See EasyShare software Help.

High camera temperature (Camera will be turned off)

The internal temperature of the camera is too high for the camera to operate. The viewfinder light glows red and the camera turns off.

Leave the camera off until it's cool to the touch, then turn it back on.

If the message reappears, contact Customer Support (Getting help).

Unrecognized file format

The camera cannot read the picture format.

Transfer the unreadable picture to the computer (Connecting camera to computer), or delete it (Deleting pictures and videos).

No images in Favorites. Press "review" for current images.

There are no Favorites in the camera's internal memory.

See Tagging pictures as favorites.

Camera error #

See user's guide

An error is detected.

Turn the camera off, then back on. If error reappears, write down the number and contact Customer Support (Getting help).



Previous Next