Kodak EasyShare printer dock plus series 3 — User's Guide


Table of Contents > Using the wireless features of your printer dock > Printing from a Bluetooth® wireless technology enabled device

5 Using the wireless features of your printer dock

Printing from a Bluetooth® wireless technology enabled device

The on-board Bluetooth radio uses Bluetooth 1.1 technology, allowing you to print from compatible Bluetooth wireless technology enabled devices, including many personal digital assistants (PDAs) and wireless mobile telephones. Use your wireless device to review pictures, choose printing options, and print.

NOTE: The Kodak EasyShare printer dock plus series 3 supports OPP (Object Push) and FTP (File Transfer) profiles only.

By default, the on-board Bluetooth radio is on and ready to receive signals from a compatible Bluetooth technology enabled device.

To turn the Bluetooth radio off:


  • Press the Bluetooth button, . Press again to turn it on.

To turn the Bluetooth radio default to always off:

  • Press and hold the Bluetooth button for 5 seconds.

    Repeat to turn the default to always on.

NOTE: You must be within 30 ft (10 m) or less of the printer dock for the wireless signal to be received.

To print from your Bluetooth wireless technology enabled device:

  1. Set wireless technology on your device to On, then select pictures to print.

    The discovery process starts, then available Bluetooth wireless technology devices are displayed on your device.

  2. Select your printer dock on your device.

    NOTE: If your device requires you to set authentication, enter pin number 1111 (default).

  3. Select Send or Beam on your device.

    The selected images are sent to the printer dock for printing.

See your device user's guide for details.

To configure Bluetooth wireless technology settings for your printer dock:

  1. Make sure the printer driver from the included Kodak EasyShare software CD is installed on your computer (see Installing the software), then connect the printer dock to your computer with the USB cable (see Connecting to a computer).

  2. Open the Kodak wireless printer configuration utility:

    Windows OS-based computer—

    1. From the Start menu, select Programs (or All Programs).

    2. Open the Kodak folder, then open the Kodak EasyShare printer dock folder.

    3. Select Kodak wireless printer configuration utility.

    Mac OS X—

    1. Open the finder window then click the Applications button. Or, open the Applications folder on your operating drive.

    2. Open the Utilities folder, then double-click Printer Setup Utility.

    3. Double-click the printer dock from the list, then click Utility.

    The configuration utility opens on your computer.

  3. Next to Show, select Bluetooth.

  4. Change settings as necessary.

    See the configuration utility Help for details.



Previous Next