Kodak EasyShare G610 printer dock — User's guide
Table of Contents > Printing without a computer > Reducing red eye in your prints
3 Printing without a computer
Reducing red eye in your prints
Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.
-
Red-eye reduction is applied to images that were captured using the flash on your digital camera.
-
You can set red-eye reduction default to always being on or off.
-
Printing time may slightly increase when using red-eye reduction.
-
Your printer dock may apply red-eye reduction to an area such as red-painted fingernails, which darkens the area in your print. In this case, turn off red-eye reduction.
To set/change the red-eye reduction default:
-
Connect the printer dock power (see Connecting the power), then dock your camera (see Docking the camera).
-
On the printer dock, press and hold (Down button) and (Transfer button) at the same time for 5 seconds. (The Red Eye screen appears.)
-
Follow instructions on the camera or computer screen.
-
Press (OK/Print button) to accept the red-eye default setting.
Previous Next