KODAK ESP 3.2 and 3.2s All-in-One Printers — Extended User Guide


Table of Contents > Copying > Copying a document

7 Copying

Copying a document

You can copy a document using the default settings, or you can adjust the quantity, size, quality, and brightness of your copies.

Using the default settings to copy a document

The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see the bottom entry in the table under Adjusting the settings and copying a document).

To copy a document using the current default settings:

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press .

  4. Touch Copy Document.

  5. Press .

Adjusting the settings and copying a document

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press .

  4. Touch Copy Document.

  5. Touch Options, then touch or (as needed) and touch the setting you want to change.

    Copy Document Option Setting Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Color Mode

    Color (default)

    Prints full color.

    Black & White

    Prints black and white (grayscale).

    Copy Size

    Same Size (default)

    The copy is the same size as the original.

    Fit to Page

    The printer detects the size of the original on the scanner glass and the size of the paper in the paper input tray, and automatically reduces or enlarges the original so that the copy fits on the paper.

    20% to 500%

    Reduces to 20% or enlarges to 500% of the original size.

    Quality (applies to plain paper only; quality is automatically selected for photo paper)

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed.

    Draft

    The fastest print speed, but the lowest quality.

    Lighter/Darker

    Normal 0 (default)

    - 3 to +3

    Lightens or darkens the copy. Normal 0 is no change from the original; - 3 is the darkest; +3 is the lightest.

    Save as Defaults

    No / Yes

    To save the settings as the new defaults, touch Yes.

  6. Press .

Changing the number of copies of a document

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press .

  4. Touch Copy Document, then touch or to select a quantity.

  5. Press .

Enlarging or reducing a document

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press .

  4. Touch Copy Document.

  5. Touch Options, then Copy Size.

  6. Touch an enlargement or reduction selection.

  7. Press .


Darkening or lightening a document

  1. Lift the scanner lid, and place the document face down in the right-front corner of the scanner glass.



  2. Close the lid.

  3. Press .

  4. Touch Copy Document.

  5. Touch Options, then Lighter/Darker.

  6. Touch to scroll to a number below zero for a darker copy, or touch to scroll to a number above zero for a lighter copy.

  7. Touch the setting you want to apply.

  8. Press .



Previous Next