KODAK HERO 4.2 All-in-One Printer — Extended User Guide


Table of Contents > Copying > Copying a document

7 Copying

Copying a document

You can copy a document using the default settings, or you can make adjustments to the quantity, size, quality, and brightness of your copies. When you copy a document, the printer will always use paper from the main (bottom) paper tray.

Using the default settings to copy a document

The default settings are either the factory default settings (see Resetting factory defaults), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a document).

To copy a document using the current default settings:

  1. Place the original document in the ADF or on the scanner glass (see Loading originals).

  2. Press .

  3. Touch Copy Document.

  4. Press to begin copying.

    NOTE: If you load the original document in the ADF, the ADF automatically feeds the document into the printer when you begin copying.

Adjusting the settings and copying a document

  1. Place the original document in the ADF or on the scanner glass (see Loading originals).

  2. Press .

  3. Touch Copy Document, then touch Options.

  4. Touch or , then touch the setting you want to change.

    Copy Document Option Setting Description

    Quantity

    1 (default) to 99

    The number of copies that print.

    Color Mode

    Color (default)

    Prints full color.

    Black & White

    Prints black and white (gray scale).

    Copy Size

    Same Size (default)

    The copy is the same size as the original.

    Fit to Page

    The printer detects the size of the original on the scanner glass and the size of the paper in the paper tray, and automatically reduces or enlarges the original so that the copy fits on the paper.

    Choose Percentage

    Reduces to 20% or enlarges to 500% of the original size.

    Quality

    Normal (default)

    Good quality output; prints faster than Best.

    Best

    The highest quality, but the slowest print speed; eliminates the banding effect that sometimes occurs when printing Draft or Normal.

    Draft

    The fastest print speed, but the lowest quality.

    Lighter/Darker

    Normal, - 3 to +3 (Normal is default)

    Lightens or darkens the copy. Normal is no change from the original; - 3 is the darkest; +3 is the lightest.

    Save as Defaults

    No / Yes

    To save settings as the new default, touch Yes.

  5. Press to begin copying.

Changing the number of copies of a document

  1. Place the original document in the ADF or on the scanner glass (see Loading originals).

  2. Press .

  3. Touch Copy Document.

  4. Touch or to select a number.

  5. Press to begin copying.

Enlarging or reducing the size of a copy

  1. Place the original document on the scanner glass (see Loading originals).

  2. Press .

  3. Touch Copy Document, then touch Options.

  4. Touch Copy Size, then touch Choose Percentage.

  5. Touch an enlargement or reduction percentage, then touch OK.

  6. Press to begin copying.

Darkening or lightening a copy

  1. Place the original document in the ADF or on the scanner glass (see Loading originals).

  2. Press .

  3. Touch Copy Document, then touch Options.

  4. Touch , then touch Lighter/Darker.

  5. Touch to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy.

  6. Press to begin copying.



Previous Next