KODAK DX3500 Digital Camera — User's Guide


Table of Contents > Reviewing Your Pictures > Running a Slide Show

3 Reviewing Your Pictures

Running a Slide Show

Use the Slide Show feature to sequentially display your pictures on the camera LCD or on a television screen (or any other external video device that is equipped with a video input, such as a computer monitor or digital projector).


 If you are running the slide show on a television:
  • First connect the video cable (included with your camera) from the video-out port on the camera to the video-in port on your television.

    Refer to your television User's Guide for details on video-in setup.

    The camera LCD turns off and the television screen acts as the camera display.

Starting the Slide Show

  1. Turn the Mode dial to Review and press the Menu button.

  2. Highlight the Slide Show menu , then press the Select button.


  3. Highlight Begin Show, then press Select.

The pictures in the camera (from internal memory or Picture Card, depending on your picture storage location) are each displayed once, in the order in which you took them. Then the camera returns to the Menu screen.

  4. To cancel the Slide Show, press Select.

NOTE: If you connect or disconnect the video cable while a slide show is running, the slide show stops. When you restart it, by selecting Begin Show, it begins again with the first picture in your camera.

Changing the Display Interval

The factory interval setting displays each picture for 5 seconds. You can increase the display interval to up to 60 seconds.

  1. On the Slide Show screen, highlight Interval, then press Select.

  2. Select how long you wish to display each picture (5-60 seconds).

    To scroll through the seconds menu faster, hold an arrow button down.

  3. Press the Select button.

The interval setting remains until you change it.



Previous Next