KODAK PALMPIX Camera for the PALM m500 Handheld Series — User's Guide

Table of Contents > Working With Your Pictures > Beaming Pictures to Another Handheld

---

4 Working With Your Pictures

Beaming Pictures to Another Handheld

You can beam your pictures to another PALM Handheld via the IR port. The receiving handheld must have KODAK PALMPIX Software installed, and must be at its home screen when receiving.

You can beam only one picture at a time.

Before you begin, make sure that Beam is set to On in the PALM Preferences (Prefs) menu.

To beam a picture from the Image List—With the Image List displayed, tap ®Record®Beam Selected.

To beam the displayed picture—With the picture displayed, tap the check box for the picture you want to beam, then tap ®Beam Image.

For more information about beaming pictures, refer to the guides that came with the PALM Handheld.

NOTE:

If the receiving handheld does not have KODAK PALMPIX Software installed, you can beam the application as well. You need two files for the application to run—palmpix.prc and palmpixLib.prc. Refer to the guides that came with the PALM Handheld for information on beaming applications.

Previous Next