Kodak EasyShare CX6330 zoom digital camera — User's Guide
Table of Contents > Getting Started > Setting the Date and Time
1 Getting Started
Setting the Date and Time
Setting the Date & Time, First Time
The Date and Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.
|
|
|
|
|
1.
SET DATE & TIME is highlighted. Press the OK button.
(Select Cancel to set the date and time at a later time.) The Date & Time screen appears. |
||
Setting the Date & Time, Anytime
|
|
|
|
|
|
1.
Turn on the camera. Press the Menu button.
|
||
|
2.
Press
 to highlight Setup Menu, then press the OK button. |
|||
|
3.
Press
 to highlight Date & Time, then press the OK button. The date format is YYYY/MM/DD. The time is displayed in a 24-hour format. |
|||
|
4.
Press
 to adjust the date and time. Press  to advance to the next setting. |
|||
|
5.
When finished, press the OK button.
|
|||
|
6.
Press the Menu button to exit the menu.
The setting remains until you change it. |
|||
| NOTE: | Depending on your computer operating system, Kodak EasyShare software may let your computer update the camera clock when you connect the camera. See the EasyShare software Help for details. |
Previous Next