Kodak EasyShare CX6200 digital camera — User's Guide

No images to display

There are no pictures in the current storage location.

Change picture storage location setting (Managing Your Storage Location Setting).

Memory card requires formatting

The card is corrupted or formatted for another digital camera.

Insert a new card or format the card (Formatting Internal Memory or SD/MMC Card).

Caution: Formatting erases all pictures and videos, including protected files.

Memory card cannot be read (Please format memory card or insert another card)

Internal memory requires formatting

The camera internal memory is corrupted.

Format the internal memory (Formatting Internal Memory or SD/MMC Card).

Caution: Formatting erases all pictures and videos, including protected files. (Formatting internal memory also erases email addresses and album names. To restore them, see Kodak EasyShare software Help.)

Internal memory cannot be read (Please format internal memory)

Remove USB cable in camera

Restart computer if needed

USB cable is connected to camera.

Unplug the USB cable from the camera.

No memory card (Files not copied)

There is no card in the camera. Pictures were not copied.

Insert a card (Inserting an SD/MMC Card).

Not enough space to copy files (Files not copied)

There is not enough space in the location you are copying to (internal memory or the card).

Delete pictures from the location you are copying to (Deleting Pictures and Videos), or insert a new card.

Read-only memory card, change to internal memory to capture

The card in the camera is write-protected.

To take a picture, insert a new card or change storage location to internal memory (Managing Your Storage Location Setting).

Memory card is protected (Reset switch on memory card)

Switch on card is in write-protect position.

Reset the switch as shown on camera screen.

Memory card is locked (Insert new memory card)

The card is write-protected.

To take a picture, insert a new card or change storage location to internal memory (Managing Your Storage Location Setting).

Memory card is unusable (Insert new memory card)

The card is slow, corrupted, or unreadable.

Insert a new card (Inserting an SD/MMC Card).

Recording stopped. Record in internal memory (Card speed is slow)

Card cannot be used to take videos.

Change storage location to internal memory (Managing Your Storage Location Setting). Use this card to take pictures only.

Memory card is full (Cannot save album tagging)

There is no space remaining.

Insert a new card (Inserting an SD/MMC Card), transfer pictures (Transferring Pictures With the USB Cable), or delete pictures (Deleting Pictures and Videos).

Internal memory is full (Cannot save album tagging)

Memory card is full (Cannot save share tagging)

Internal memory is full (Cannot save share tagging)

Date and time have been reset

This is the first time you turned on the camera; or the battery has been removed for an extended period of time; or the battery is exhausted.

Reset the clock (Setting the Date and Time).

High camera temperature. (Camera will be turned off.)

The internal temperature of the camera is too high for the camera to operate. The viewfinder light glows red and the camera turns off.

Leave the camera off for several minutes, then turn it back on.

If the message reappears, contact Customer Support (Getting Help).

Memory card is full

There is no more space on the card in the camera.

Transfer pictures to the computer (Transferring Pictures With the USB Cable), delete pictures from the card (Deleting Pictures and Videos), insert a new card, or change storage location to internal memory (Managing Your Storage Location Setting).

Internal memory card is full

There is no more space in the camera's internal memory.

Transfer pictures to the computer (Transferring Pictures With the USB Cable), delete pictures from the internal memory (Deleting Pictures and Videos) or change storage location to Auto (Managing Your Storage Location Setting) and insert card (Inserting an SD/MMC Card).

Unrecognized file format

The camera cannot read the picture format.

Transfer the unreadable picture to the computer (Transferring Pictures With the USB Cable), or delete the picture (Deleting Pictures and Videos).

No address book on camera (Connect with computer to import address book)

Address book has not been copied to the camera from the computer.

Create and copy address book from computer. See EasyShare software Help.

No album names on camera (Connect with computer to import album names)

Album names have not been copied to the camera from the computer.

Create and copy album names from computer. See EasyShare software Help.

Camera error #XXXX. See user's guide.

An error is detected.

Turn the Mode dial off, then back on. If the message reappears, contact Customer Support (Getting Help).