Kodak EasyShare printer dock 4000 — User's Guide
Table of Contents > Using the Printer Dock with a Computer > Connecting to a Computer
4 Using the Printer Dock with a Computer
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came with your Kodak EasyShare camera. To purchase one separately, see a retail dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION: Make sure your camera is NOT in the printer dock when you are connecting to the computer. |
1.
Make sure the power is connected to the printer dock (see Connecting the Power), and the Kodak EasyShare printer dock software is installed on the computer (see Installing the Software).
|
|||
|
2.
Plug the labeled end of a USB cable into the labeled USB port on your computer. See your computer documentation for details.
|
||
3.
Plug the other end of the USB cable into the square USB connector on the back of the printer dock.
|
Previous Next