Kodak EasyShare printer dock 4000 — User's Guide

Table of Contents > Using the Printer Dock with a Computer > Transferring Pictures

---

4 Using the Printer Dock with a Computer

Transferring Pictures

You can transfer pictures directly from your Kodak EasyShare camera to your computer (see your camera user's guide).

With the camera docked, you can transfer pictures through the printer dock.

1. Make sure the Kodak EasyShare software is installed (see Installing the Software) and the printer dock is connected to your computer (see Connecting to a Computer).

2. Place the camera in the printer dock (see Docking and Charging the Camera).

3. Press the Transfer button on the printer dock.

   A new drive appears for the printer dock, and the Kodak EasyShare software opens on your computer (if it is installed).
   
   

4. Use the Kodak EasyShare software to transfer pictures from the printer dock to your computer.

   The printer dock Transfer light blinks green while the pictures are being transferred. Charging is suspended during transfer.
   
   

   See your camera quick start guide or the Kodak EasyShare software Help for information on installing and using the Kodak EasyShare software.

   NOTE:

   If the Kodak EasyShare software is not installed, you can transfer from the printer dock to your computer by copying pictures from the newly established camera drive to your computer hard drive. See your computer documentation for details.

   
   

Previous Next